| | | |
|
|
|
|
|
Our Donkey Engine Project, started in 2001, is finally nearing completion. Viewed: 467 times.
|
Donkeys 2 and 3 await plumbing, paint and, of course, wooden sleds. Viewed: 441 times.
|
Close up of the working clutch lever on donkey # 3 Viewed: 392 times.
|
The cluth levers on donkey # 3 note the mis-matched handles. We did this to represent a machine that was repaired by the EDHL Co. shops. Viewed: 375 times.
|
| | | |
| | | |
|
|
|
|
|
The brake pedals still need to be installed. The frame is bolted together with 1-72, hex head, screws. Viewed: 354 times.
|
Donkey # 3 Viewed: 307 times.
|
This is the log sled for donkey #1. I am carving the recesses for the truss rod nuts. the other skid is visible in the background. Viewed: 307 times.
|
This is the cut-timber sled for donkey # 3 the material is red oak. Red oak is HEAVY so this engine will be very stable for loading logs. Viewed: 284 times.
|
| | | |
| | | |
|
|
|
|
|
Detail of the red oak sled showing the cracks and wood grain I added. Viewed: 271 times.
|
The two cut-timber sleds for donkeys 2 and 3. Viewed: 279 times.
|
Detail of the sled for donkey #2. The material is poplar. This is a lightweigt hardwood so this donkey should be able to drag itself. Viewed: 268 times.
|
The cut-timber sleds with their boilers, in primer, mocked up. Viewed: 284 times.
|
| | | |
| | | |
|
|
|
|
|
Note the addition of the fairlead block on top of the front cross-beam on these sleds. Viewed: 268 times.
|
DSC03066.JPG Viewed: 427 times.
|
DSC03073.JPG Viewed: 386 times.
|
DSC03069.JPG Viewed: 291 times.
|
| | | |
1
